Drop in your drawings and tell Digi your trade. You get back a priced bill of quantities, marked-up drawings and a quote. You don't measure a thing.
TakeoffRiverside Apts · 24 sheetsTrace every room. Click every light. Undo the mistakes. Then type it all into a spreadsheet and price it, usually after hours.
Upload, say the trade, walk away. Digi measures, counts, prices and writes the quote.
Upload the PDFs, or pull the whole set straight from Procore, Autodesk or Aconex. Specs, schedules and old BoQs help too.
Procore
Autodesk
AconexMicrosoft 365Salesforce+300 moreJust say it: “electrical”, “flooring and skirting”, “windows and doors”. Want it done your way? Give Digi your price list, product library or a past BoQ.
Close the laptop. Digi reads every sheet, finds the legends, counts, measures and prices on its own. Most jobs are done in about 30 minutes; big sets take longer. We'll email you when it's ready.
A bill of quantities in your format, every item marked up on the drawing so you can check it at a glance, and a priced quote ready to send. Scope 3 carbon too, if you need it.
Most takeoffs are ready to send as they are. Want a change? Ask Digi in plain words, or use the built-in count, area and line tools. No extra estimating software needed.
Pick what you want in your takeoff. Digi will ask for exactly what it needs, check it has everything, then run it.
Your columns, your item codes, your layout.
Included in every takeoffTap any line to see exactly what was counted, and where.
Included in every takeoffYour price list in, a priced quote out, in your template.
Every item matched to the exact product you supply, down to the part number.
Carbon per line and per job, ready for ASIC-mandated reporting.
New revision? Digi takes off both and shows what changed and what it costs.
Matrak watches your projects in the systems you already use. New drawings or a new revision land, and the takeoff, pricing, carbon and changes are done and sent back before anyone asks. Nothing new for your team to learn.
ProcoreRev CAutodeskRev CAconexRev CEvery trade you quote, every job that comes in.
What changed between revisions, and what it costs.
Priced quotes straight into your ERP or tender pack.
Scope 3 embodied carbon on every job, automatically.
Bid on the jobs you'd normally pass on. One trade costs less than an hour of your time.
For subcontractors →Estimators & QSLet Digi do the measuring. You check, adjust and put your name on it.
For estimators →BuildersQS support, revision costing and ASIC Scope 3 carbon reporting on every project.
For builders →PartnersAffiliate, white-label and API. A national plumbing supplier already runs its takeoffs through it.
For partners →Scope 3 from the drawings, with supplier EPDs or NABERS factors, on every project and revision.
See embodied carbon →One credit = one trade on one project. Prices in your currency:
For comparison, most takeoff software costs US$2,000–3,600 per person, per year, and you still do all the clicking.
Your exact price, in your currency and with any tax, is shown at checkout before you pay.
For most drawing sets, no. Upload, tell Digi the trade, and the BoQ, markups and quote come back ready to send. If you want to change something, ask Digi or use the built-in tools, but that's up to you.
Most takeoffs are done in about 30 minutes, and most within an hour. Very large sets (30+ sheets) can take a few hours. You don't need to watch: close the tab and we'll email you.
Honestly: it depends on your documents and your brief. The AI can only measure what's shown in the drawings you give it, and it builds to what you ask for — so accuracy varies with drawing quality and trade. That's why every measurement is shown marked up on the drawing for you to verify, the built-in tools make fixes fast, the AI can talk you through improving the takeoff, and you can trigger a full re-run. If you'd like a hand, up to an hour of human-estimator time is included with every takeoff. For screening a job or a first-pass BOQ, it saves hundreds of hours against a fully manual takeoff.
More than 90 trades, from drawing PDFs plus schedules and specs. It counts symbols, measures areas and traces lineal runs in a single pass.
Yes. Give Digi your price list, product library or an old BoQ and the quote comes out in your format, priced with your rates.
Your drawings stay yours — secure and private.
No demo, no install. Drop your drawings in and Digi does the rest.
AI Takeoff by Matrak
Matrak's AI reads your construction drawings, marks them up, measures what's in them and drafts a Bill of Quantities to your requirements — in minutes, with zero clicks. We've produced full zero-click BOQs on real commercial projects across a range of trades; AI output varies with the documents and instructions you give it, so every measurement is shown marked up on the drawing for you to verify. Built on the Matrak platform, which has tracked materials across 90+ trades on 1,300+ projects.
Takeoffs are the most monotonous, thankless part of construction. Matrak does them for you. Drop in a drawing set — or pull it straight from Procore, Autodesk or Aconex — and Matrak's AI reads the drawings and drafts the takeoff for you in minutes: marked-up plans, measurements, and a Bill of Quantities built to your quoting format — ready for you to verify. No new system to learn. It hands hundreds of estimating hours back to your team and gets more bids out the door. Until now this was an internal system for the world's largest builders — today it's open to everyone.
A takeoff isn't just a bid tool. Understanding the materials on a project is the foundation of automating all of construction. Matrak turns your BOQ into the live spine of the build: materials traceability, supply-chain coordination, ordering, logistics, warehousing, quality (ITPs), install, schedule — even Scope 3 embodied-carbon tracking. The takeoff is the cheat-code; everything downstream follows from it.
See how it all connects at Matrak Connect.
Run a fast, low-cost takeoff to size up a job before you commit. Know the quantities — and whether it's worth chasing — in minutes, not days.
Won the bid? The same tool drafts the full marked-up BOQ to your format — verify and tighten it with the built-in tools, then let it drive ordering, manufacturing and the rest of the build.
Matrak supports more than 90 trades — counting symbols, measuring areas and tracing lineal runs. A few of the trades estimators use it for:
Connect Procore, Autodesk Construction Cloud or Aconex and import your drawing set with no downloading and re-uploading. Tailor the output to your trades and your quoting format, then move straight from a won bid into supply-chain coordination.
No software subscription stacked on top of your labour costs. You buy a pool of credits and spend them as you go — one credit is one trade on one project.
Pay-as-you-go — a single credit.
Spend 20 trades on one project (GC), or one trade across 20 projects (subbie) — your call.
💸 A single-trade BOQ from a human estimator often runs $2,000+ on a large project — and takes days. Matrak drafts a marked-up first pass for $89 — around 4% of that cost — in minutes, not days.
Because it's pay-as-you-go and this cheap, you can run a takeoff just to screen a job — decide whether an invitation is worth bidding in minutes, instead of losing hours in the PDFs only to find it's the wrong job for you.
Already on Matrak? Your subscription includes free monthly takeoff credits.
Prices in USD. Your exact price is shown at checkout before you pay.
Want a hand with the results? Every takeoff includes up to an hour of human-estimator time from our experienced team — if you choose to use it — to resolve tweaks and tidy the output. Need more estimating work than an hour covers? We'll quote it at standard takeoff rates. You're never on your own.
Every other takeoff tool — Bluebeam, Togal, Autodesk Takeoff, PlanSwift, STACK and more — still needs a person to run the takeoff. See how Matrak's zero-click approach compares:
It's an AI that reads your construction drawings and drafts a marked-up Bill of Quantities to your requirements. Drop in a PDF or import from Procore, Autodesk or Aconex, and a first-pass takeoff is ready in minutes — marked up so you can verify every number.
Takeoffs are pay-as-you-go: $89 for one trade on one project, or $1,370 for 20 credits. Every takeoff includes up to an hour of human-estimator time if you'd like our team to help resolve tweaks; estimating work beyond that hour is quoted at standard takeoff rates.
Honestly: it depends on your documents and your brief. The AI can only measure what's shown in the drawings you give it, and it builds to what you ask for — so accuracy varies with drawing quality and trade. That's why every measurement is shown marked up on the drawing for you to verify, the built-in tools make fixes fast, the AI can talk you through improving the takeoff, and you can trigger a full re-run. If you'd like a hand, up to an hour of human-estimator time is included with every takeoff. For screening a job or a first-pass BOQ, it saves hundreds of hours against a fully manual takeoff.
More than 90 trades, from drawing PDFs plus schedules and specs. It counts symbols, measures areas and traces lineal runs in a single pass.
Those tools still need a person to run the takeoff. Matrak reads your drawings and drafts the BOQ for you — marked up so you can verify every number — then feeds the result into your whole supply-chain. See our comparison pages for the detail.
Your drawings stay yours — secure and private.
Yes. Connect Procore, Autodesk Construction Cloud or Aconex and import your drawing set directly — no downloading and re-uploading.
Matrak Enterprises Pty Ltd · ABN 92 636 521 232
